Click image to view full size image
Product Description
Manual operated.
Applications
The divert seat valve is applied to the food-processing industry, beverage, pharmaceutical and fine chemicals industries.
Seat valves are operated automatically by a single-acting or a double-acting pneumatic actuator. By supplying compressed air, the shaft is moved to place the valve in the "open" or "closed" position.
This valve can bear high pressure up to 30 bar, but depend on the type of actuator
The 180o rotation of the pneumatic cylinder to realize the interchange of normally open and normally closed.
Design and features
Size: DN25/1" to DN 100/4"
Normally closed (NC) in the standard version.
Hygienic design according to 3A standard
360° Adjustable body
Easy assembly / disassembly of internal parts by loosening a clamp fastener
Standard weld connection (mm or inch)
Materials
Parts in contact with medium: AISI 316L, AISI 304
Other parts in stainless steel: AISI 304
Gasket: EPDM according to FDA 1 77.2600
Internal surface finish: Ra<0.8μ M
External surface finish: Sandblast or mirror polish
Techical specifications
Size: DN25-DN100/1"-4"
Working temperature: -10º C to 120º C (EPDM) 14° F to 248° F, 140º C/284° F (SIP, max. 30min)
Max. Working pressure: 10bar 145PSI
Compressed air pressure: 5-10 bar
Air connecitons: G1/8" (BSP)
Options
Gaskets: FPM (viton (R)) in compliance with FDA 177.2600
Connections: DIN, SMS, RJT, IDF
Double-acting pneumatic actuator
External position sensor
Steam barrier (if shaft sterilisation is required)
Body jacket insulation
Valve position regulator
Double stop actuator
Diaphragm type valve cavity
C-TOP control unit
Surface finish: Ra≤ 0.5μ M
The divert seat valve is applied to the food-processing industry, beverage, pharmaceutical and fine chemicals industries.
Seat valves are operated automatically by a single-acting or a double-acting pneumatic actuator. By supplying compressed air, the shaft is moved to place the valve in the "open" or "closed" position.
This valve can bear high pressure up to 30 bar, but depend on the type of actuator
The 180o rotation of the pneumatic cylinder to realize the interchange of normally open and normally closed.
Design and features
Size: DN25/1" to DN 100/4"
Normally closed (NC) in the standard version.
Hygienic design according to 3A standard
360° Adjustable body
Easy assembly / disassembly of internal parts by loosening a clamp fastener
Standard weld connection (mm or inch)
Materials
Parts in contact with medium: AISI 316L, AISI 304
Other parts in stainless steel: AISI 304
Gasket: EPDM according to FDA 1 77.2600
Internal surface finish: Ra<0.8μ M
External surface finish: Sandblast or mirror polish
Techical specifications
Size: DN25-DN100/1"-4"
Working temperature: -10º C to 120º C (EPDM) 14° F to 248° F, 140º C/284° F (SIP, max. 30min)
Max. Working pressure: 10bar 145PSI
Compressed air pressure: 5-10 bar
Air connecitons: G1/8" (BSP)
Options
Gaskets: FPM (viton (R)) in compliance with FDA 177.2600
Connections: DIN, SMS, RJT, IDF
Double-acting pneumatic actuator
External position sensor
Steam barrier (if shaft sterilisation is required)
Body jacket insulation
Valve position regulator
Double stop actuator
Diaphragm type valve cavity
C-TOP control unit
Surface finish: Ra≤ 0.5μ M
Manual operated.
| Product Name: | Divert seat valve |
| Valve Body Material: | SS304 or SS316L |
| Seal Material: | EPDM |
| Max. Working Pressure: | 30Bar |
| Max. Working Temperature: | 120 degree C |
| Availably size: | DN25-DN100 or 1" - 4" |
| Availably connection: | Thread,Weld,Clamp |
| Availably standard: | DIN,SMS,RJT,3A |
| Operated: | Pneumatic |
| Certificate: | FDA,CE |